New product line MFT PRO


RESERVED DOCUMENTATION

You need to Login to download the TECHNICAL DATA SHEET and the restricted documents.
Click on Reserved Area, from the main menu and enter your details to log on.
Not a member yet? click here.


Condividi Condividi

MFT is the ideal product range, manufactured with the eponymous technology, offering only the advantages of the best types of polymer-bitumen.

MFT  proposes three products: MFT MONOMFT PRO and MFT EVO, characterised by three different combinations of compound and by three different quality profiles that will meet any performance or economic requirement. 

 

 

MFT PRO
apao upper surface -15°C
sbs lower surface -25°C

 

A very high quality product, characterised by very high flexibility at low temperatures and by a carrier that ensures excellent performance. Particularly well-suited to refurbishing exsting waterproofing layers even in cold climates or at low ambient temperatures.

 

Compound

MFT PRO is an innovative range of multi-coating bituminous membranes made with the MFT Multi-Flex Technology, another result of the constant Copernit research, combining in one product the advantages of both APAO and SBS membranes.

MFT PRO technology exceeds the traditional coating processes and gives the possibility to design the bituminous membrane by choosing three different bituminous compounds layers into the same product, depending on the final destination of use and required performances.

MFT PRO, in fact, is composed by the following three coats:

-       Upper face: highly modified bituminous compound with selected poly-olefins and copolymers (APAO), giving an oustanding resistance to high temperatures and UV ageing

-       Lower face: superior elastomeric compound made of distilled bitumen modified with SBS (Styrene-Butadiene-Styrene) polymers, which ensures extreme elasticity, ease of application and superior bonding and tightness of all joints and overlaps

-       Reinforcement impregnation: special modified compound, made on purpose for the best pliability and resistance to mechanical stresses and perforation

MFT PRO is a membrane range of un-compromising quality, designed for use by professionals for professional applications where the waterproofing layers really must withstand static and dynamic forces as well as severe weathering and adverse climate conditions.  

 

Carrier

MFT PRO has an isotropic and rot-proof spunbond polyester carrier, reinforced and stabilised with longitudinal glass yarns that provide superior dimensional stability and reduce to an absolute minimum the risk of shrinkages caused in time by weathering and by swift thermal excursions.     

        

 

Intended use according CE Mark Standards

  • MFT PRO 4,0 mm: s

    ingle layer for roof waterproofing (EN 13707) – s

    ingle layer for the waterproofing renovation of existing roofs (EN 13707);   
  • MFT PRO MINERAL 4,5 kg/m2: single cap sheet layer for the waterproofing renovation of existing roofs (EN 13707) – top layer in multi-layer systems for roof waterproofing (EN 13707).

 

 

Available surface finishes

 

MFT PRO - upper surface

"Ready-to-paint" sand; the innovative sand finish is evenly incorporated in the bituminous membrane it allow the MFT PRO to be paint immediately after laying without the need for subsequent work sessions and additional charges. 

 

MFT PRO MINERAL -upper surface

Self-protection by means of slate flakes available in standard grey or other various colours upon request: protects the membrane from ageing caused by UV rays.

 

Embossy

The embossing of the lower face, coated with a polypropylene or polyethylene film, offers a greater contact surface with the flame allowing a rapid film retraction.

 

Use & Application

Flat roofs  Pitched roofs Vaulted roofs Industrial roofs

MFT PRO is indicated for single layer waterproofing systems on flat, pitched or vaulted roofs, made of reinforced concrete cast on site or prefab, of terraces, under-floorings etc. In case of direct exposure to weathering agents, MFT MONO shall be protected with reflective paint, gravel, flooring or by a layer of self-protected (mineralised) membrane in order to prolong the waterproofing lifespan.

MFT PRO MINERAL is recommended as a cap sheet layer for applications without other types of protection; it is particularly suitable as a single cap sheet layer for the waterproofing renovation of existing roofs.  

For correct installation refer to information provided by Copernit Technical Department.

 

30% made of recycled raw materials Completely recyclable Non-hazardous waste material Used-oil free!! Chlorine free!! Asbestos free!! Tar free!! Oxidized-bitumen free!!

 

 

Request for product information

  

««   back to categories